Copper Foil Tape
Principal Uses
This is a zero-temper, high tensile copper foil tape of special electrolytic grade (see specs below). The copper foil substrate accepts solder and is malleable. This tape may be used in industrial and electrical applications including solar panel manufacture, printed circuit production and repair, flexible flat conductor, electrostatic and EMI/RFI shielding.
Features
The service temperature range is -40 to +250F (-34C to +177C).
The aggressive acrylic adhesive forms a permanent bond to low surface energy materials and textured surfaces, as well as non-porous surfaces.
The adhesive is conductive.
The malleable copper foil conforms well to irregular shapes and surfaces. It is UL 510 listed (UL file #E137857).
Surface Preparation / Application
Surface should be dry, clean and free of contaminants prior to tape application. As with all pressure-sensitive adhesive system products, use firm pressure when applying tape. Best adhesion typically occurs over 24 hours; maximum adhesion 1 week.
Note: This tape is a non-stock item, and incurs a minimum buy. Please inquire for additional details. Samples available upon request.
Slit Rolls: Tape Part Numbers
1.65 mil Lined Copper Foil Tape sizes | ||||
Part Number | Decimal Width | Fractional | Roll Length | Rolls per Case |
VT290L-0500 | 0.500" | 1/2" | 36 yards | 72 |
VT290L-0750 | 0.750" | 3/4" | 36 yards | 48 |
VT290L-1000 | 1.000" | 1" | 36 yards | 36 |
VT290L-1500 | 1.500" | 1-1/2" | 36 yards | 24 |
VT290L-2000 | 2.000" | 2" | 36 yards | 24 |
VT290L-2500 | 2.500" | 2-1/2" | 36 yards | 12 |
VT290L-3000 | 3.000" | 3" | 36 yards | 12 |
Copper foil tape specifications
Technical Specifications for Copper Foil Tape | ||
Category | Data | Test Method |
Substrate | Copper Foil | N/A |
Adhesive | Conductive acrylic | N/A |
Foil Thickness | 1.4 mils (.04 mm) | N/A |
Total Tape Thickness | 3.0 mils (.08 mm) | PSTC-133 |
Tape color | Copper | Visual |
Adhesion to Steel | 32 oz/inch (8.9 N/25 mm) | PSTC-101 |
Tensile Strength | 36 lbs/inch (162.7 N/25mm) | PSTC-131 |
Elongation | 6% | PSTC-131 |
Shear Adhesion | >24 hrs @ 2.2 psi (15.2 kPa) | PSTC-107 |
Resistance | MIL-STD-202C: 0.002 ohms/sq. in. | Method 307 |
Copper Tape Shielding Effectiveness: Frequency Attenuation
MIL-STD-285M | |
100 Khz | 141 db |
1 Mhz | 137 db |
10 Mhz | 114.5 db |
50 Mhz | 96 db |
100 Mhz | 101.5 db |
200 Mhz | 111 db |
400 Mhz | 102 db |
800 Mhz | >128 db |
900 Mhz | >127 db |
1 Ghz | >116 db |
5 Ghz | 92 db |
10 Ghz | 80 db |
17 Ghz | 87 db |
Data sheet for copper foil tape
2millinedcopperdata2021.pdf | |
File Size: | 2128 kb |
File Type: |
Metal-Tapes.com is a site owned and maintained by Viadon.com.
NOTE: It is the customer's responsibility to test a sample (we provide FREE samples of all of these tapes) of the tape to determine suitability. All tape is custom-slit to width and it not returnable after order, unless found to be defective.
NOTE: It is the customer's responsibility to test a sample (we provide FREE samples of all of these tapes) of the tape to determine suitability. All tape is custom-slit to width and it not returnable after order, unless found to be defective.