Aluminum Foil Tape - 3 mils unlined
Principal Uses
A dead-soft aluminum foil tape, unlined. Uses include masking protection for electroplating and painting operations. Suitability extends to metal patching applications and sound dampening. Offers high reflectivity for effective heat light interference. Excellent as a waterproofing vapor barrier, and air leakage protection.
Features
This 3 mil thick unlined/self-wound aluminum foil tape is a dead-soft aluminum foil. This allows for ease of handling and a high degree of conformance to irregularly shaped surfaces. The extremely aggressive adhesive provides for excellent stop-off during masking and is designed for low or no residue removal.
May be torn by hand, eliminating the need to use sharp utensils to cut. Lack of liner allows for quick and efficient application, speeding processes and saving time. Clean up is faster as there is no liner to dispose.
Surface Preparation / Application
Surface should be dry, clean and free of contaminants prior to tape application. As with all pressure-sensitive adhesive system products, use firm pressure when applying tape. Best adhesion typically occurs over 24 hours; maximum adhesion 1 week.
Meets federal specifications for LT-80-B and MilSpec MIL-T-23397 B.
Unlined Aluminum Foil Tape Part Numbers and Pricing
Case quantities not required; only a minimum purchase at least $50.
3 mil Lined Aluminum Foil Tape sizes | ||||
Part Number | Decimal Width | Fractional | Roll Length | |
AF805-0500NL | 0.500" | 1/2" | 60 yards | |
AF805-0750NL | 0.750" | 3/4" | 60 yards | |
AF805-1000NL | 1.000" | 1" | 60 yards |
Need a different width than what is listed here, or ready to buy? Contact us! This aluminum foil tape can be slit to the exact width you need, from 3/8" width to 1" wide. Wider tape rolls of the unlined material are NOT recommended due to tearing of the material when unwinding. See our Lined Aluminum Foil Tape page for wider tape rolls.
NOTE: Metal-Tapes.com is a site owned and maintained by Viadon.com.
3 mils unlined aluminum foil tape specifications
Technical Specifications for 3 mil Lined Aluminum Foil Tape | ||
Category | Imperial Value | Metric Value |
Substrate | Dead soft aluminum | - |
Adhesive | Acrylic | - |
Foil Thickness | 3.0 mils | 0.08 mm |
Adhesion to Steel | 75 oz/inch | 20.8 N/25.4mm |
Tensile Strength | 29 lbs/in. width | 129 N/25.4mm |
Elongation | 5% | 5% |
Max Temperature | 250F | 121C |
Min. Temperature | -20F | -29C |
Data sheet for 3 mils unlined aluminum foil tape
3milunlinedalumdata2021.pdf | |
File Size: | 1864 kb |
File Type: |
Metal-Tapes.com is a site owned and maintained by Viadon.com.
NOTE: It is the customer's responsibility to test a sample (we provide FREE samples of all of these tapes) of the tape to determine suitability. All tape is custom-slit to width and it not returnable after order, unless found to be defective.
NOTE: It is the customer's responsibility to test a sample (we provide FREE samples of all of these tapes) of the tape to determine suitability. All tape is custom-slit to width and it not returnable after order, unless found to be defective.