Aluminum foil tape - 3 mils, lined
Principal Uses
A dead-soft aluminum foil tape on liner. Uses include vapor barrier protection, waterproof sealing, heat reflection and heat dissipation. Often used for masking during paint stripping and electroplating applications. Can be die cut to various shapes and sizes. Hand tearable.
Features
This 3 mil thick lined aluminum foil tape may be used in temperatures from -40F to +250F. It is especially well-suited to being applied at low temperatures, so this tape excels at outdoor cold-apply situations, particularly for weatherproof sealing. It is single coated (adhesive on one side) and uses an aggressive, acrylic-based adhesive system for strong holding power on surfaces to which it is attached.
The dead-soft foil is temper-free, so that the foil can wrap around complex curves and surfaces, or other irregularly shaped objects without trying to "snap back." The liner is an easy-release system and allows for fast unwinding and cutting. It also reduces wrinkling while unwinding, if aesthetic concerns are important.
This product is not designed for a clean removal from substrates.
Slit Rolls: Tape Part Numbers Case quantities are NOT REQUIRED. Minimum purchase is only $50.
Lined Aluminum Foil Tape Part Numbers and Pricing
Case quantities not required; only a minimum purchase at least $50.
| 3 mil Lined Aluminum Foil Tape sizes | ||||
| Part Number | Decimal Width | Fractional | Roll Length | |
| AFLT-0500 | 0.500" | 1/2" | 60 yards | |
| AFLT-0750 | 0.750" | 3/4" | 60 yards | |
| AFLT-1000 | 1.000" | 1" | 60 yards | |
| AFLT-1500 | 1.500" | 1-1/2" | 60 yards | |
| AFLT-2000 | 2.000" | 2" | 60 yards | |
| AFLT-3000 | 3.000" | 3" | 60 yards | |
Need a different width than what is listed here or ready to buy? Contact us! This aluminum foil tape can be slit to the exact width you need, from 3/8" width to 60" wide.
Metal-Tapes.com is a site owned and maintained by Viadon.com.
NOTE: It is the customer's responsibility to test a sample (we provide FREE samples of all of these tapes) of the tape to determine suitability. All tape is custom-slit to width and it not returnable after order, unless found to be defective.
Tape specifications
Metal-Tapes.com is a site owned and maintained by Viadon.com.
NOTE: It is the customer's responsibility to test a sample (we provide FREE samples of all of these tapes) of the tape to determine suitability. All tape is custom-slit to width and it not returnable after order, unless found to be defective.
Tape specifications
| Technical Specifications for 3 mil Lined Aluminum Foil Tape | ||
| Category | Imperial Value | Metric Value |
| Substrate | Dead soft aluminum | Dead soft aluminum |
| Adhesive | Acrylic | Acrylic |
| Foil Thickness | 3.0 mils | 0.08 mm |
| Total Tape Thickness | 4.3 mils | 0.11 mm |
| Release liner thickness | 3.0 mils | 0.08 mm |
| Adhesion to Steel | 50 oz/inch | 350 N/100mm |
| Tensile Strength | 26 lbs/in. width | 180 N/100 mm |
| Elongation | 5% | 5% |
| Max Temperature | 250F | 121C |
| Min. Temperature | -40F | -40C |
Data sheet for 3mils thick lined aluminum foil tape
| 3millinedalumdata2021.pdf |
